[20 Pieces Per Case] Tension Clamp, Compact Wire Tensioner, Compatible with 48.6 and 42.7 Single Pipe Clamps, Malsa. *For Corporate Customers Only.

Our store offers a curated selection of genuine Japanese products. You can shop with complete peace of mind knowing that all our items are authentic. Please note that the instructions and manual for this product may only be available in Japanese.

1. KEY FEATURES: - Dual-purpose clamp (φ48.6/φ42.7): Chromate plating - Wire tensioner body: Unichrome plating - Unit weight: 770g - Quantity: 20 pieces

2. PRODUCT DESCRIPTION: Wire tensioning for vegetables and fruit trees can be easily done in a short time. - From installing the clamp to winding the wire, one 17 mm wrench is required. - The adjustment width is wider than a turnbuckle, so you can tighten the wire strongly, and even if it loosens, you can tighten it again. - Can wind up wires and wires up to 5 mm in thickness.[Examples of use] For fruit and vegetable attraction lines: tomatoes, cucumbers, eggplants, green peppers, peas, yam, figs, melons, etc. For fruit tree shelves: parent netting for shelves, trellising for apples, Y-shaped farming for peaches, short tree pruning for grapes, etc. For netting: bird prevention, windproofing, light blocking, etc. [Precautions for use]●Please confirm that there is no major deformation, bending, damage, wear, or significant rust on each part of the main body and the clamp.●Please do not throw this product.This may cause deformation.●This product is for tensioning wires and wires, so please do not use it for any other purpose.●Do not use damaged wires.●Do not use the wire with a strength that exceeds its strength.●When using a wire grip, please use it in the correct installation method.*It may not be possible to use it depending on the type of wire/wire or the diameter of the pipe.In that case, please contact us.[How to use] ●Stretching the wire 1. When shipping the product, the dual-purpose clamp and the small wire tensioner body can move freely.If you wish to use it in a fixed position, please use a wrench to secure it as shown in the illustration.2. Attach the clamp to the pipe.3. Pass the wire through the two holes in the shaft.4. Turn the wire tensioner with a wrench so that it overlaps the passed wire.5. Use a wrench to wrap the wire until it is taut.●Loosening the wire 1. When loosening the tensioned wire, use a wrench to firmly fix the wire tensioner shaft.2. Remove the spring from the stopper.3.Tighten the wire a little and raise the stopper as shown.4. Slowly loosen the wire with a wrench.

3. PRODUCT DIMENSIONS & WEIGHT: - Weight: 15.5 kg - Dimensions: 40.0 x 33.0 x 12.0 cm

4. SPECIFICATIONS: