ZNZHNSI 2C23T 3 In 1 Handheld Oscilloscope Multimeter DDS 2 10MHz Sampling 10000 Diode Test Generator, Channels, Bandwidth, 50MSa/s Rate, Counts,

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. [Oscilloscope mode] 2-channel handheld oscilloscope, 10MHz bandwidth, real-time sampling rate 50MSa/s, recording depth 32kb, maximum measurement voltage ±400V, automatic measurement function, trigger function auto/normal/single, vertical sensitivity 200mv/div-10v/ Supports saving and exporting div, waveform images. [Multimeter mode] 4 digits 10000 counts. AC voltage: 0-750V, DC voltage: 0-999.9V, DC/AC current: 0-9.999A, resistance: 0-99.99MΩ, capacitance: 0-99.99mF, temperature: -55℃~1300℃/ -67~2372°F, diode, continuity measurement. A multifunctional meter ideal for professional, factory, school, hobby and home use. [Signal Generator] The maximum waveform output frequency is 2MHz, the step reaches 1Hz, and it can output 7 types of waveforms, including sine wave, square wave, triangle wave, full wave, half wave, noise wave, and DC wave. 【Excellent Design】The oscilloscope adopts FPGA+MCU+ADC hardware architecture, built-in high voltage protection module, adopts 2.8 inch 320*240 resolution HD LCD display, built-in 3000mAh rechargeable lithium-ion battery, Standby time is up to 6H, Type-C interface supports 5V/1A power adapter charging. [Save function] One-click save and screening function. You can connect to a PC with Type-C and upload saved images. Display the reference waveform and measured waveform on the same screen and easily compare the waveforms. Product parameters Product parameters Screen: 2.8 inch true character screen Resolution: 320*240 Charging TYPE-C: (5V/1A): 3000mAh lithium battery Support functions: Oscilloscope, signal generator, digital multimeter (see function parameters) ) Standby time 8 hours (maximum laboratory theory) Product size: 141.7x93.5x38mm Weight: 300g Functional parameters -Oscilloscope Parameters Channel: Dual Channel Sample Rate: 50M Analog Bandwidth: 10M (Dual Channel Independent 10M) Memory Depth: 32kb Input Impedance: 1ΜΩ Timebase Range: 50ns-10s Vertical Sensitivity: 20mV/div-10V/div (X1) Maximum measurement voltage: 400V Trigger mode: Auto, normal, single Trigger Type: Rising Edge, Falling Edge Display Mode: YT/Scroll Coupling: AC/DC Waveform Screenshot Saving: Support PC Waveform Display: Support Multimeter Parameter Function DC Voltage: 9.999V/99.99V/9 99.9V Accuracy: (0.5%+3) AC Voltage: 9.999V/99.99V/750V Accuracy: (1%+3) DC Current: 9999uA/99.99mA/999.9mA/9.999A Accuracy: (1.2%+3)   AC current: 9999/99.99mA/999.9mA/9.999A Accuracy: (1.5%+3)  Resistance: 9.999ΜΩ/999.9ΚΩ/99.99ΚΩ/9.999ΚΩ/999.9Ω Accuracy: (0.5%+3)  ;               99.99KΩ Accuracy: (1.5%+3)  Capacitance: 999.9uF/99.99uF/9.999uF/