RXL SL Riser Bar Bmx Handlebar Mtb Handlebar Carbon 600mm Cross Bike Handlebar Bicycle Handlebar Carbon 3K Matte Finish 31.8

1. Mountain Bike Handlebar Diameter: 31.8mm; Appearance: UD/3K Glossy/Matte; Flat Handlebar/Riser Handlebar: 580/600/620/640/660/680/700mm; Riser Backsweep: 12°; Riser Upsweep: 18mm; Flat Backsweep: 3°. Thickened tube wall, compatible with most mountain bikes, very suitable for downhill and off-road riding. 2,Downhill Handlebar Carbon Made of T700 carbon fiber,Compared with aluminum alloy,carbon fiber:It is lighter.Looks much better.Color is brighter.Excellent compressive strength.Anti-shock.Moderate elasticity,improve the class of your bike in minutes.1-1/4 inch carbon fiber handlebar is very light and stiff,carbon fiber bar vibrates faster and more comfortable than aluminum alloy bar. 3. Please install the MTB Downhill Handlebar correctly and follow the specified tightening torque (4Nm). It is recommended to use a hexagonal wrench to tighten the screws. Since it is made of carbon, it is recommended to tighten it by hand and support the body. It may crack if it is subjected to high stress. 4. The torque value for carbon handlebars is 4Nm, the maximum torque is 5Nm. Just tighten the handlebars alternately and gradually. Tighten the flat handlebars until they can't move, then tighten them a little more. You can also apply carbon fiber assembly paste to your MTB handlebars to ensure a tight fit with little risk of slipping. 5. Choosing the size of your bike handlebars: The width of mountain handlebars doesn't really correlate with the size of the wheels, but depends on your riding style and the type of terrain you usually ride on. Wider handlebars make for heavier and faster riding bikes like enduro bikes. In general, cross-country riders prefer shorter handlebars, while enduro and downhill riders prefer very wide handlebars. Brand: RXL SL Material: Carbon fiber Color: Gray/Red/Green/Blue/Black Appearance: 3K gloss/matt Weight: Approx. 220g ±10g Handlebar diameter: 31.8mm Bar end diameter: 22.2mm Flat handlebar: 31.8*580/600/620/640/660/680/700mm Riser handlebar: 31.8*580/600/620/640/660/680/700mm Riser back sweep: 12 degree Riser upsweep: 18mm Flat back sweep: 3 degree Application: Mountain Bike/Mtb Bike Features:1, When installing the carbon MTB handlebar, please make sure that the diameter of the handlebar is the same as our 31.8mm handlebar. 2, According to the specified tightening torque (4Nm), the maximum torque for clamping on the bar: 5Nm, the torque specification of all screws is 3-5Nm. 3, Please use a torque spanner to install, there will be a slight dent in the locking position during normal installation, this is a normal phenomenon, it will not affect the strength (too much torque may lead to breakage, can not be used properly, ordinary 3.5Nm with anti-slip medium can lock it, anti-slip agent will roll back. No lock fixing is required) 4. Apply the carbon fiber assembly paste to the 31.8 rod, make it fit tightly, reduce the chance of slipping, and tighten evenly to 5nm in a cross, being careful not to overtighten the metal fittings.