Kyoritsu Electric Meter (KYORITSU) 8035 Non-Contact Phase Detector

Compatible with 2mm² to 325mm² (IV) wires (finished outer diameter φ2.4mm to 30mm) Checks phase sequence and phase loss with LED and buzzer Automatically detects ground phase in delta connection and indicates with a flashing LED Includes a magnet for installation inside a distribution panel Wide measurement voltage range of 3-phase 70 to 1000V AC LED light-up function for clear visibility even in daylight Compliant with international safety standards IEC 61010-1 CAT.IV 600V, CAT.III 1000V <Specifications> [Measurement functions] Phase detection (positive and negative phase), phase loss, and ground phase detection [Measurement principle] Electrostatic induction [Measurement voltage range] 3-phase power supply 70 to 1000V AC (sine wave, continuous) [Measured conductor diameter] Insulated wire with a finished outer diameter of φ2.4 to 30mm [Measurement frequency range] 45 to 66Hz [Phase detection display] Positive phase: The green LED for the rotating arrow flashes sequentially (clockwise), the green LED for the positive phase characters lights up, and the buzzer sounds intermittently. Reverse phase: Red LED flashes sequentially (counterclockwise), reverse phase character red LED lights up, buzzer sounds continuously. [Display function] LED light-up function. [Battery low warning] Low battery: Power LED flashes. [Operating temperature and humidity range] -10 to 50°C, 80% (non-condensing). [Storage temperature and humidity range] -20 to 60°C, 80% (non-condensing). [Compliant standards] IEC 61010-1 (JIS C 1010-1) CAT.IV 600V, CAT.III 1000V Pollution degree 2, IEC 61326, IEC 61557-1, -7. [Batteries used] 4 x AA alkaline batteries (LR6). Continuous use time: Approximately 100 hours (auto power off after approximately 10 minutes). [External dimensions] 112 (L) x 61 (W) x 36 (D) mm. [Weight] Approximately 380g. [Test cord] Approximately 70 cm [Measurement Channel Colors] R: Red, S: White, T: Blue Made in Japan Check phase sequence and missing phases using both the LED and buzzer Improve work efficiency with the included suction cup Interchangeable alligator clips and probes for different measurement locations Weight: Approximately 380 g