Product Name: 8 Teeth RS550 DC Motor
Gear Teeth: 8 Teeth
Rotation Direction: CW/CCW
Installation Screw Spacing: 25mm
Stall Current: 45A
Shaft Total Length: 85mm
Shaft Diameter: 3.17mm
Model Number: RS550
Torque: Max. 1555.3g.
Commutation: Brush
Power: Max. 200W
No Load Speed: 25000RPM
Installation Screw Size: M3 (Not included)
Working Current: 6.53A
Output Shaft Length: 18mm
Voltage: 24V DC
Gear Face Width: 10mm
No Load Current: 1.1A
Gear Diameter: 9.6mm
Features:
- Solidly Constructed. The shell made of stainless steel material, pure copper coil, high efficiency, strong output power, stable performance.
- Easy to Installation. Motor front can be fixed with 2 x M3 screws, best replacement for damaged or rusty motors on your ride on vehicles.
- Suitable for electric ride on vehicles, battery powered rid on car, electric go karts, electric ATV, electric rock crawler, and various DIY electrical projects.- RS550 24V 25000RPM high speed DC motor with cooling fans, applicable voltage range: 12-24V, at 12V the speed is about 12000RPM, can effectively increase the torque of your ride on vehicle and enhance its climbing ability.
- 8 Teeth Metal Gear. The gear sturdy and wear resistant, already securely assembled on the motor shaft, no need for manual assembly, easy to use.
How to choose a motor for electric ride on vehicles:
1. Confirm your motor model is RS550/RS555 or motor diameter(about 37.2mm), and motor body length(about 57mm), and total length(about 85mm).
2. Confirm the voltage of your motor and choose a motor with the same or similar voltage.
3. Confirm the number of teeth of your motor, make sure to choose the motor with the same number of teeth, and verify that the outer diameter and face width of the gears are the same or similar.
Note:
- The RS550 motor has multi voltage and multi gear teeth combinations, which can be adapted to many electric vehicles on the market, but there are too many brands and models of electric ride on vehicles, which makes it impossible for us to identify them all, so please compare the model and teeth of the original motor before purchasing. It must be the same model to replace it.
- This motor rated voltage of 24V, and capable of normal operating within a DC voltage range of 12-24V. The lower the input voltage, the lower the motor speed will be. Do not exceed 24V input voltage, otherwise it may be damaged easily.
- This motor can rotate in forward and inverse directions. If the rotation direction is inversed, simply swap the positive and negative connections to correct it.
- Can be replace for rs550 and rs555 model number motor, the RS550 and RS555 motors can be used interchangeably.
Package Including:
1 x 8 Teeth DC Motor
The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.
